Notes On Disposal - TILSBERK DVISION Manual De Instrucciones

Cleaning a helmet after removing the helmet adapter
The helmet adapter can be easily removed from the helmet with a bit of force. The adhesive pads
and especially Sugru can leave residue in the helmet.
On hard surfaces, the residues can easily be removed with a moist cloth. If you want to use
detergents or solutions containing alcohol, follow the helmet manufacturer's instructions.
Slight glue residues might remain permanently on fabric.
Maintenance
You can change the display of your DVISION module yourself, if the display is damaged or has
become dull (Chapter 5.2 on page 46).
If you want to have your DVISION serviced or checked, contact the manufacturer ("Manufacturer's
contact details" on page 1).
Serial number
If you want to contact the manufacturer to have your DVISION serviced or
checked, keep the serial number of your device at hand. You will find the
serial number on the label on the top of the DVISION module as well as in
the "Settings" menu in the DVISION app once the device has been paired.

2.5 Notes on disposal

Dispose of the product in accordance with local rules and regulations.
The device with the built-in battery may only be disposed of properly via
collection boxes in shops or at municipal collection points.
Do not dispose of the device and the battery it contains with household waste.
INFO
If you remove the helmet adapter from the helmet, you cannot reuse
the glue.
If you want to re-install the helmet adapter in the helmet, remove glue
residues from the helmet adapter first. You can use an alcohol wipe to
do so.
Then reinstall the helmet adapter in the helmet.
S A F E T Y
EN
13