Symbols On The Product; Product Information - Hilti TE 700-AVR Manual De Instrucciones

Hilti charger
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these
operating instructions.
The numbering reflects the sequence of operations shown in the
illustrations and may deviate from the steps described in the text.
Item reference numbers are used in the overview illustration and
refer to the numbers used in the key in the product overview sec-
tion.
These characters are intended to specifically draw your attention to
certain points when handling the product.

1.3 Symbols on the product

1.3.1 Symbols on the product
The following symbols are used on the product:
Chiseling
Chisel positioning
Protection class II (double-insulated)
Wear protective gloves

1.4 Product information

Hilti products are designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel.
personnel must be specifically informed about the possible hazards. The
product and its ancillary equipment can present hazards if used incorrectly
by untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Breaker
Generation
Serial no.
2 English
TE 700­AVR
01
428076
*428076*
This