Frequently Asked Questions & Troubleshooting - INVENTOR CB-WUI-20L Manual De Usuario

12. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Are the
dehumidifiers
costly?
Where should the
dehumidifier be
placed ideally?
Can the air filter be
replaced by another
type of filter, such
as HEPA?
Which is the
appropriate room
humidity level?
Why does
condensation
persist on
windows even with
dehumidifier's use?
Why am I not able
to set the desired
humidity level by
use of the control
panel?
EN
For about the first month of use, the dehumidifier operates
intensively. This will gradually decrease within time, since
the dehumidifier will have been calibrated in its working
environment. Condensed households may sometime be
significantly expensive to heat. The use of a dehumidifier may
lower energy costs.
For optimal results, it is suggested that the dehumidifier
is placed in a central area. Doors within the household
should be open in order for the dehumidifier to enhance its
operation.
The dehumidifier's filter cannot be replaced by any other type
of filter since it is specifically designed to operate with this
unit.
Maintaining a proper home humidity level is essential
for your well-being and that of your household. Extreme
fluctuations cause adverse effects on both; low humidity
may cause respiratory problems and damage on wooden
doors, windows, and furniture, and make you vulnerable to
electric shocks due to increased static electricity. On the other
hand, high humidity may promote mold growth, serving as
breeding grounds for various bacteria and resulting in poor
health and also a damaged home. The ideal humidity levels
fluctuate between 45% to 55%.
When the desired humidity level is reached, there is a
possibility of partial humidity formation on windows. This
occurs due to the temperature variation between the window
and the external weather conditions.
• Operating the dehumidifier should significantly reduce
condensation formation on windows.
In order to access the humidity "+' and "-" range settings, you first
need to press the "Mode" button, and have no led indication on
the control panel, hence Dryer, Cont., and Smart modes should
be off.
This will allow you to manually change the desired humidity level.
31