INVENTOR CB-WUI-20L Manual De Usuario página 24

Wi-Fi
By long pressing for 3 second the power button (
this function is selected the indication ''AP'' will appear on the led display. If pairing between the
router and the unit is successful after a period of 8 minutes, the unit will exit Wi-Fi connection mode
and the unit will enter all previously set functions. If there is a failure in pairing within the 8minute
time-frame, the unit will automatically exit Wi-Fi connection mode.
BUCKETLESS MODE
Bucketless mode: By using the continuous drainage equipment, the dehumidifier can operate
without the tank, entering the Bucketless mode.
To operate the device under the Bucketless mode, first remove the unit from the water tank. The
indicator ''Eb'' will appear on the led display immediately. Press the FILL LEVEL button (
the up button (˄) for 3 seconds to initiate the mode following the tips below. While on Bucketless
mode, the indication (
To exit the Bucketless mode press the FILL LEVEL button (
When operating the Bucketless mode:
• Insert the water hose into the drain outlet and make sure all connections are
firmly tightened in order to avoid any possible leaks.
• Lead the water hose towards a suitable drainage facility and be certain that the
water flows naturally. For correct drainage, make sure the hose stays below the
level of the drain hose outlet.
• Ensure that the water hose is properly connected to the device.
• The dehumidifier should be placed on a flat surface in an upright position.
• Keep the dehumidifier at a height distance at least 10cm from the floor so the
water can flow easily.
• Do not move the dehumidifier while in Bucketless operation. Firstly turn off the
device and remove the plug.
• While on Bucketless mode, don't touch the FILL LEVEL button or the unit will exit
Bucketless mode.
24
Upon installation of the application Inventor Control, please
make sure that the dehumidifier is turned on.
) will lit on the display.
In Bucketless mode the capacity of the water tank cannot be
adjusted.
) the wireless connection will initiate. While
) and the UP (˄) button.
) and
EN