Frequently Asked Questions & Troubleshooting - INVENTOR EP3-ION16L Manual De Usuario

10. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Are dehumidifiers
costly?
Where should the
dehumidifier be
placed ideally?
Can the filter be
replaced by a HEPA
filter?
Which is the
appropriate room
humidity level?
Why does
condensation persist
on windows even
with dehumidifier's
use?
Why am I not able
to set the desired
humidity level by
use of the control
panel?
EN
For about the first month of use, the dehumidifier operates
intensively. This will gradually decrease within time, since
the dehumidifier will have been calibrated in its working
environment. Condensed households may sometime be
significantly expensive to heat. The use of a dehumidifier may
lower energy costs.
For optimal results, it is suggested that the dehumidifier is
placed in a central area. Doors within the household should be
open in order for the dehumidifier to enhance its operation.
The dehumidifier's filter cannot be replaced by any other type
of filter since it is specifically designed to operate with this unit.
Maintaining a proper home humidity level is essential for your
well-being and that of your household. Extreme fluctuations
cause adverse effects on both; low humidity may cause
respiratory problems and damage on wooden doors, windows,
and furniture, and make you vulnerable to electric shocks due
to increased static electricity. On the other hand, high humidity
may promote mold growth, serving as breeding grounds
for various bacteria and resulting in poor health and also a
damaged home. The ideal humidity levels fluctuate between
45% to 55%.
When the desired humidity level is reached, there is a
possibility of partial humidity formation on windows. This
occurs due to the temperature variation between the window
and the external weather conditions.
• Operating the dehumidifier should significantly reduce
condensation formation on windows.
In order to access the humidity "+' and "-" range settings,
you first need to press the "Mode" button, and have no led
indication on the control panel, hence Dryer, Cont., and Smart
modes should be off.
This will allow you to manually change the desired humidity
level.
15