Troubleshooting Tips - INVENTOR C2-10L Manual Del Propietário

All manuals and user guides at all-guides.com
Before calling for service, review the chart below.
Problem
Unit does not start
Dehumidifier does not
dry the air as it should
The unit makes a loud
noise when operating
Frost appears on the
coils
Water on the floor
Power indicator light
flashes 5 times per
second.

TROUBLESHOOTING TIPS

What to check
Make sure the dehumidifier's plug is pushed completely into the
outlet.
Check the house fuse/circuit breaker box.
Check to see if the water bucket is full or if the dehumidifier
has reached its preset level.
Check to make sure the water bucket is positioned properly.
Did not allow enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture blocking the
front or back of the dehumidifier.
The humidity selector may not be set low enough.
Check that all doors, windows and other openings are securely
closed.
Room temperature is too low, below 5 ºC (41 ºF).
There is a kerosene heater or something giving off water vapor
in the room.
The air filter is clogged.
The unit is tilted instead of upright, as it should be.
The floor surface is not level.
This is normal. The unit has an Auto defrost feature.
Hose connection may be loose.
Intended to use the bucket to collect the water, but the back
drain plug is removed.
Temperature sensor or Humidity sensor error. Unplug the unit
and plug it back in. If error repeats, call for service.
9