Repair And Maintenance; Technical Service; Warranty; Compliance With Local Laws And Regulations - VWR isiScope 300 Serie Manual De Instrucciones

12. Repair and maintenance

Microscopy environment
This microscope is recommended to be used in a clean, dry and shock free environment with a temperature of
0-40°C and a maximum relative humidity of 85 % (non condensing). Use a dehumidifier if needed.
To think about when and after using the microscope
The microscope should always be kept vertically when moving it and be careful so that no moving parts, such as
the eyepieces, fall out. Never mishandle or impose unnecessary force on the microscope.
Never attempt to service the microscope yourself.
After use, turn off the light immediately, cover the microscope with the included dust-cover, and keep it in a dry
and clean place.
Electrical safety precautions
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the ope-
ration voltage of the equipment and that the lamp switch is in off-position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label. Ho-
wever, users do have full responsibility to use this equipment safely.
Cleaning the optics
If the optical parts need to be cleaned try first to: use compressed air. If that is not sufficient: use a soft lint-free
piece of cloth with water and a mild detergent. And as a final option: use the piece of cloth moistened with a 3:7
mixture of ethanol and ether. Note: ethanol and ether are highly flammable liquids. Do not use them near a heat
source, near sparks or near electric equipment. Use these chemicals in a well ventilated room.
Remember to never wipe the surface of any optical items with your hands. Fingerprints can damage the
optics. Do not disassemble objectives or eyepieces in attempt to clean them.
For the best results, use the VWR cleaning kit (see catalog number below).
If you need to send the microscope to manufacturer for maintenance, please use the original packaging.

13. Technical service

Web Resources
Visit the VWR's website at www.vwr.com for:
• Complete technical service contact information
• Access to VWR's Online Catalogue, and information about accessories and related products
• Additional product information and special offers
Contact us For information or technical assistance contact your local VWR representative or visit. www.vwr.
com.

14. Warranty

VWR International warrants that this product will be free from defects in material and workmanship for a period
of five (5) years from date of delivery. If a defect is present, VWR will, at its option and cost, repair, replace, or
refund the purchase price of this product to the customer, provided it is returned during the warranty period. This
warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication, or from
ordinary wear and tear. If the required maintenance and inspection services are not performed according to the
manuals and any local regulations, such warranty turns invalid, except to the extent, the defect of the product is
not due to such non-performance.
Items being returned must be insured by the customer against possible damage or loss. This warranty shall be
limited to the aforementioned remedies. IT IS EXPRESSLY AGREED THAT THIS WARRANTY WILL BE IN LIEU
OF ALL WARRANTIES OF FITNESS AND IN LIEU OF THE WARRANTY OF MERCHANTABILITY.

15. Compliance with local laws and regulations

The customer is responsible for applying for and obtaining the necessary regulatory approvals or other authori-
zations necessary to run or use the Product in its local environment. VWR will not be held liable for any related
omission or for not obtaining the required approval or authorization, unless any refusal is due to a defect of the
product.
10