Care And Storage - SATA SATAjet 3000 K spray mix Instrucciones De Servicio

Operating instructions SATAjet 3000 K spray mix
10.7. Replace material sieve
Risk of injuries from components coming loose or leaking
material.
Operation of the spray gun without a material sieve will lead to loss of
the sealing function.
→ Only use the spray gun when the material sieve is inserted.
Remove the material sieve
■ Unscrew material filter housing [16-3] using SATA universal spanner
(size 19). Hold with open-end spanner (size 14) at threaded part [16-1].
■ Remove material strainer [16-2].
Fit new material sieve
■ Insert material strainer [16-2] in material filter housing [16-3].
■ Screw material filter housing on and hand-tighten with SATA universal
spanner (size 19). Hold with open-end spanner (size 14) at threaded
part [16-1].

11. Care and storage

Careful handling, together with constant maintenance and care of the
product, is necessary to ensure the functioning of the spray gun.
■ Store the spray gun in a dry place.
■ Clean the spray gun thoroughly every time after it has been used and
every time before changing the material.
■ After cleaning, dry the complete spray gun with clean compressed air
and grease moving parts with SATA high performance grease (Art. No.
48173).
Warning!
EN
43