Safety Labels; Starting Instructions - Craftsman 247.88780 Manual Del Operador

DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL AL L
MOVING PARTS HA VE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN STICK TO
UNCLOG DISCHARGE CHUTE.
1. KEEP AWAY FROM ROTATING AUGER
CONTACT WITH AUGER CAN AMPUTATE
HANDS AND FEET.
2. DISENGAGE CLUTCH LEVERS, STOP
ENGINE, AND REMAIN BEHIND HANDLES
UNTIL ALL MOVING PARTS HAVE STOPPED
BEFORE UNCLOGGING OR SERVICING
MACHINE.
3. TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS
USE EXTRA CAUTION WHEN OPER ATING ON
GRAVEL SURFACES.
4. READ OPERATOR'S MANUAL.
S33636

SAFETY LABELS

CHUTE DIRECTIONAL CONTROLS
ADJUSTABLE
CHUTE TILT

STARTING INSTRUCTIONS:

1.) INSERT IGNITION KEY AND SNAP IN PLACE.
2.) MOVE CHOKE CONTROL TO THE "CHOKE"
POSITION. PUSH PRIMER BUTTON 3x.
ROPE START: PULL SLOWLY UNTIL HARDER TO
3.)
PULL, THEN PULL RAPIDLY TO START. REPEAT
PRIMING IF NEEDED.
ELECTRIC START: DO NOT USE IN RAIN.
CONNECT POWER CORD AND PUSH STARTER
BUTTON. REPEAT PRIMING IF NEEDED.
4.) MOVE CHOKE CONTROL SLOW LY TO THE
"RUN" POSITION.
5.) TO STOP ENGINE: PULL KEY OU T.
7
DANGER
AVOID INJU RY FROM
ROTATING AUGER -
KEEP HANDS, FEE T
AND CLOTHING AWAY .
ADJUSTABLE CHUTE
DISCHARGE
CHOKE