Notes On Wheel Storage; Maintenance And Care - Cartrend 10441 Manual De Instrucciones

The rows of holes are offset to one another by 90° and labeled:
• 145 mm × 220 mm, suitable for tire widths of max. 220 mm,
• 225 mm × 255 mm, suitable for tire widths of max. 255 mm.
4. Attach a rest to the lower tube (without plug). Make sure that the lower flange of the rest clicks
into the two grooves on the locking pin.
5. Lift the next rim / rim with tire onto the second rest. Follow the instructions under step 1.
6. Attach the end tube with plug (1) to the lower tube (without plug).
7. Follow steps 2 to 4 to continue loading.
The wheel tree is now loaded.

Notes on wheel storage

The wheel tree is an important aid in the proper storage of valuable rims / rims with tires that are
not currently in use.
In addition to the instructions in this manual, also heed the following notes on the proper storage
of rims and wheels.
• Thoroughly clean the rims / rims with tires after removing them from your vehicle. Remove any
residue from the inside of the rims. To do so, use mild soapy water and a soft sponge, as well
as clear water to rinse.
• Prevent corrosion on rims and the wheel tree by allowing rims / rims with tires to fully dry.
Otherwise, condensation may form and lead to corrosion on rims and the wheel tree.
• Before storage, carefully check all rimes and tires for signs of damage and wear. If you detect
any damages, e.g. foreign objects in tires, low tread, tears, brittleness, or deformation, it is
imperative to have a professional check and repair the rims and tires. Do not store damaged
rims and tires.
• Mark the rims / rims with tires using the colored tire markings from the accessory kit (23)
according to the printed markings (e.g. "front left" and "back right"). Fasten the tire markings
using a band to each rim.
• Park the wheel tree loaded with rims / rims with tires at a dark, dry, and frost-free location.
The ideal storage temperature is between +10 °C and +30 °C.
• Before using the rims / rims with tires after storage, check them for signs of damage and
wear.

Maintenance and care

Please note!
Risk of damage!
Improper use of the wheel tree may result in damage to the product.
• Do not use any aggressive cleaners, brushes with metal or nylon bristles as well as sharp or
metallic cleaning items such as knives, hard scrapers, etc. They may damage the product
surfaces.
• Clean the wheel tree exclusively with a moist cloth and a mild cleaning agent.
• After cleaning, fully dry the wheel tree with a soft, dry cloth.
• Check the wheel tree regularly (at least once every six months) for corrosion. Wipe down any
affected areas with a slightly greased cloth.
• Make sure to grease the bearings regularly.
• Do not expose the wheel tree to weather conditions.
• It is recommended to store the wheel tree in the original packaging for periods of disuse
24
EN Mobile tyre holder