Replacing The Battery - Sonel CMP-1015-PV Manual De Instrucciones

WARNING
To avoid electric shock, do not use the meter if the bat-
tery compartment cover is not in place or is not
properly fastened.
CMP-1015-PV is powered by one Li-Pol 7.4 V 1200 mAh re-
chargeable battery.
To replace the rechargeable battery:

set the rotational function selector at OFF,

remove test leads from the terminals of the meter.

turn the fixing screw of the compartment cover to the position:

remove the cover,

remove the rechargeable battery and insert a new one, observ-
ing the polarity,

put on the cover and turn the fixing screw to the position:
 While performing the measurements with the low battery
symbol displayed, the user must be aware of additional
measurement uncertainties or unstable operation of the
device.
 If the meter does not work properly, check the recharge-
able battery in order to ensure that it is in proper condi-
tion and properly installed in the device.
66

7 Replacing the battery

CMP-1015-PV – USER MANUAL