Replacing Batteries - Sonel MIC-5 Manual Del Uso

5 Replacing batteries

The meter is powered by two LR03 AAA batteries
of 1.5 V. After the meter is turned on, the level of
batteries or rechargeable batteries is displayed for
2 seconds (100%, 75%, 50%, and 25%).
flashing
constant
28
Additional information
displayed by the meter
The charge of the batteries (re-
chargeable batteries) is below 25%.
The charge of the batteries (re-
chargeable
measurements, except for measure-
ments of the voltage.
To replace the batteries:
 disconnect the test probes from the
measuring circuit,
 use a tool or a coin to open the bat-
tery
clockwise direction),
 remove the compartment,
 replace the batteries, ensuring their
correct polarity,
 insert the container and close it
(clockwise direction).
After replacing and turning On, the
meter will be activated in the power
supply selection mode.
 Use SEL button to select batteries
(bAt)
(Acu).
 Confirm the selection by pressing
START button.
MIC-5 – USER MANUAL
batteries)
compartment
or rechargeable
precludes
(counter-
batteries