Replacing The Battery - Sonel CMP-2000 Manual De Uso

Frequency
Range Resolution
66Hz 0,01Hz
660Hz 0,1Hz
6,6kHz
66kHz 10Hz
660kHz 100Hz
1MHz 1kHz
Minimum Input Range: >10Hz.
Minimum pulse width: >1μs.
Duty cycle limits: >30% and <70%.
Overload protection: 600VDC or AC rms.
% Duty Cycle
Range Resolution
5...95%
Frequency range: 5% to 95% (40Hz to 20kHz).
The readings of % duty cycle measurements will show on the sub-
display.
Overload protection: 600V DC or AC rms.
9

Replacing the battery

To avoid electrical shock, disconnect the test leads and any
input signals before replacing the battery. Replace only with
same type of battery.
This meter is powered by a 6LR61 (or 6F22, NEDA type 1604
or equivalent 9-volt battery). When the meter displays the , the
battery must be replaced to maintain proper operation. Use the fol-
lowing procedure to replacing the battery:
40
1Hz
0,1%
WARNING!
CMP-2000 – USER MANUAL
Accuracy
±(0,1% rdg + 5d)
±(0,1% rdg + 5d)
±(0,1% rdg + 5d)
±(0,1% rdg + 5d)
±(0,1% rdg + 5d)
±(0,1% rdg + 5d)
Pulse width
>10μs
Trigger
Level
>3,2V
>3,2V
>3,2V
>3,2V
>3,2V
>3,2V
Accuracy ( 5V logic)
±(2,0% rdg + 10d)