Vfd Function; Hvdc Function; Peak Function - Sonel CMP-1015-PV Manual De Instrucciones

6.2 VFD function

To measure the AC current or voltage behind the inverter, fre-
quency converter or in the VFD system:
 set the rotary switch to the voltage or current measurement posi-
tion,
 press and hold the MODE/VFD button until the "VFD" symbol ap-
pears.

6.3 HVDC function

To measure the high DC voltage (HVDC) e.g. in a photovoltaic
installation:
 connect the high-voltage adapter to the device,
 set the rotary switch at V
 press the MODE/VFD button to display the symbol
 using the ► button, select the HVDC option.

6.4 PEAK function

PEAK function is intended to measure peak values and it is dif-
ferent from MAX function, which measures maximum values, by the
duration of recorded event. In case of PEAK function, it is 1 ms.
This allows user to record very short alternating voltage surges.
The meter will update the display each time a lower negative, or
higher positive peak occurs. Auto Power Off feature will be disabled
automatically in this mode.
 To activate the mode, use the buttons
option.
 To deactivate the mode, select the PEAK option again.
 This function is available only when measuring AC voltage and cur-
rent.
 While PEAK is active, autoranging is disabled, therfore it is advised to
start the function after connecting test leads to the measurement
point. Running PEAK before that may cause overrange symbols to
appear.
62
,
AC+DC
CMP-1015-PV – USER MANUAL
,
to select the PEAK