Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7.8 PARKING BRAKE
The parking brake is used when you pause in the workplace and where the terrain is sloped, preventing the
machine from accidentally rolling.
When transporting in a vehicle, the parking brake will be no enough to block the machine. Should
immobilize the machine with ropes or slings to ensure a perfect fit. If not well immobilized
machine may cause damage to the machine , to the vehicle or open a vehicle door reaching out
the machine.
Depending on your machine model, incorporating the parking brake in
one place or another.
- If your machine is in Figure 17, fold down the piece of metal (M,
Fig.17) so it locks the driveshaft. In this way the machine does not advance.
- If your machine is in Figure 18, fold down the piece of metal (M,
Fig.18) so that the wheel locks. In this way the machine does not advance.
NOTE: Do not park the machine with the wheels in the
direction
of
safety of the machine park perpendicular to the slope.
7.9 CUTTING GUIDE
The machine has a cutting guide to help while
cutting on the line marked on the ground. Remember
that the cutting guide is aligned with the blade in the
inside position, as shown in Figure 19.
If you have the option of cutting mounted
double blade in the wider position (70cm), when mark
the surface to be cut, the mark should be 5cm further
inland than expected, as the rule of thumb is aligned
with the blade further inland Figure 20.
If you are cutting with one blade mounted on
the left side of the machine, you should replace the
cutting guide on the left. To remove the screw that it
serves as a hinge and mount it on left side Figure 21.
the
slope
when
not
working.
For
added
14
ENGLISH
Tabla de contenido
