Sima TRENCHER 60 Manual De Instrucciones Original página 61

• Maintenance, inspections and repair works must be done by authorized personnel with the engine off and
making sure the machine cannot be moved or started.
• Always obey all the signs at the construction site.
• Do not manipulate any safety device under any circumstance.
• Make sure you always have a correct lighting system when working at night or with poor light.
• Maintenance work can be dangerous if it is not done according to the manufacturers specifications.
• Use tight work clothes. Do not wear rings, bracelets, chains, etc.
• Check all the grilles, casings and protections of the moving elements are properly installed.
This machine, MUST NOT BE USED IN RAINY CONDITIONS. Cover it with
waterproof materials. If the has been exposed to the rain, check all the
electric parts and components are not wet before connecting.
ALWAYS WORK WITH GOOD LIGHT CONDITIONS.
5.1 PARTICLES AND FRAGMENTS DISCHARGE.
•
Check anybody is inside the operational field of the equipment being used or any of its parts.
•
Check the conditions and fastening of the tools and accessories and if those are appropriate
for the equipment.
•
Do not remove any protection element installed on the machine.
•
5.2 ENTANGLEMENT HAZARD.
•
Cleaning and maintenance must be done with the equipment turned off and making sure it is
standing stable and cannot move.
•
Check anybody is inside the operational field of the equipment being used or any of its parts.
•
Grilles, casings and protections that avoid the contact with moving elements must be well
fastened.
5.3 THERMAL CONTACT.
•
Wear protection globes during the substitution or supply of lubricant oil.
•
Avoid the contact with the hot parts of the machine.
•
Avoid the exposure to gas emissions from the equipment, it can cause burns on the skin.
5.4 INHALATION, INGESTION AND CONTACT WITH DANGEOUS SUBSTANCES.
•
Do not keep the machine working without making sure there is a correct ventilation dissipation of
the exhaust gas.
•
When working in dusty environments a protection masks must be used.
•
Take adequate precautions when handling dangerous substances (cements, resins, additives,
fluids, etc.).
•
Do not work with this machine in an enclosed place without ventilation.
5.5 EXPLOSIONS AND FIRES.
•
Fill up fuel with the engine off, in ventilated places; be careful when filling to avoid spilling fuel.
•
Do not smoke nor use a cell phone while filling up fuel.
•
Never check the battery or the fuel level smoking or using a lighter or a match.
•
Check there is no fuel leak. Do not do it with a lighter or a match.
•
Do not weld or apply any source of heat near the fuel system, oil or any other
flammable material.
ATTENTION: You must follow all the safety recommendations on this manual
and obey the regulations regarding health and safety at work of every place where the machine is being
used.
SIMA, S.A. does not take responsibility for the consequences of a misuse of a floor saw by an operator.
9
ENGLISH