Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. TRANSPORT.
For short distances, the floor saw TRENCHER 60-70 can be
transported onto its own wheels. Raise the blade fully and move the
saw manually.
When the machine must be lifted, use the hook located on
the front part. It will be then easy to fix steel cables or chains (Fig.
2). The transport to be used should ensure the machine safety.
WARNING: use highly- resistant cables or chains (bear in
mind the weight of the machine and see the metal label of the machine, Fig. 2).When you put down the
machine, do it gently and avoid any strong bumps on the wheels that could damage other components.
4. ASSEMBLING INSTRUCTIONS.
4.1 DELIVERY CONDITIONS
The different versions of floor saws TRENCHER 60-70 models are supplied and single-packed suitable for safe
transport. When removing the package, you should find the machine with no blade, no fuel and a bag with the
following items:
•
Kit of keys, keeping book and change blade instruction.
•
A manual of the machine and its warranty.
•
Instruction engine book.
5. RECOMENDACIONES DE SEGURIDAD Y MEDIDAS DE PREVENCIÓN
Avoid spilling fuel over the machine when filling the deposit because it can be dangerous and
could affect some of its elements.
Before starting the engine, check oil level at the crankcase, placing the machine on a flat
surface with the engine off. If needed, fill up to the required level with the oil recommended by
the engine manufacturer.
• Fill the fuel deposit in a ventilated place, taking care not to do it in excess.
• Avoid inhaling the steam created when filling the deposit.
• Avoid spilling fuel and keep always in mind this procedure when filling the fuel deposit, the steams and the
spilled fuel can be highly flammable under certain circumstances and can catch fire. If some fuel is spilled it
must be cleaned and the steams dissipated before starting the engine.
• Do not smoke when filling the deposit and avoid the presence of sparks and fire even at the place where
the fuel is storaged.
• Do not place flammable elements on the engine.
• Avoid the contact of the fuel with your skin.
• Do not allow the use of the engine without having the necessary instructions.
• Do not allow anyone to touch the engine when it is hot, it could cause burns on the skin.
• Do not allow children and pets to get close to the engine.
• Keep the fuel out of reach of children.
• Do not fill up while the engine is running and do not smoke while doing it. Try to do it in a place with good
ventilation.
• Do not start the machine if you notice there are some anomalies that could affect the safety of the persons
around.
• Keep always clean all the safety signs and labels on the machine and replace them if missing.
8
ENGLISH
Tabla de contenido
