Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RPG ONE, RPG 1.5, RPG 2.5
10. SERVIcING, MAINTENANcE, TROUBLESHOOTING
NOTE!
DANGER!
DANGER!
10.1
Maintenance
TIME/INTERVAL
Before starting work
Every time the cutter is cleaned
Every time the tool is changed
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN
Servicing, maintenance, troubleshooting
Some of the work mentioned depends a great deal on the use and on the ambient conditions.
The cycles specified are minimum specifications. In individual cases, differing maintenance
cycles are possible. To ensure the safety of the machine, perform maintenance annually using
an authorized service center with VDE testing. If the machine does not function as previously
described, the machine must also be sent into an authorized service center.
Danger of death by electric shock!
Non-observance could result in death or serious injury.
X At the end of each working cycle, before transportation, changing tools, cleaning and
performing any maintenance, adjustment or repair work, switch off the machine, wait
until the machine/tool stops running and pull the mains plug and/or take the recharge-
able battery out of the machine.
Risk of electric shock due to poor electrics!
Fatal electric shock.
X At the end of each working cycle, before transportation, changing tools, cleaning and
performing any maintenance, adjustment or repair work, switch off the machine, wait
until the machine/tool stops running and pull the mains plug and/or take the recharge-
able battery out of the machine.
X Repair and maintenance work on the electrical equipment may only be carried out by a
qualified electrician.
AcTIVITY
X Check the tube clamping if the tube is already mounted in the machine.
X Clean the clamping shells and the tool supports for the multifunctional tool.
X Clean the tool support and the multifunctional tool.
X Remove any dirt from the bearing surface of the tool holder.
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
77
Tabla de contenido
Solución de problemas
