Return Of Accumulators And Batteries; Basic Safety Instructions - Orbitalum RPG ONE Traducción Del Manual De Instrucciones Original

Ocultar thumbs Ver también para RPG ONE:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 155
ENGLISH
Information and safety instructions for the responsible body
2.3.3

Return of accumulators and batteries

• Accumulators and batteries that are marked with the adjacent symbol may not be disposed of with
household garbage as per EU Directive 2006/66/EC.
• In the case of accumulators and batteries containing hazardous materials the chemical sign for the
heavy metal contained is specified below the refuse bin: Cd = Cadmium Hg = Mercury Pb = Lead
• Valid for Germany: The end consumer is obliged to return defective or used accumulators and
batteries to the distributor or to the returning facilities set up to this purpose.
2.4

Basic safety instructions

The maschine (hereinafter referred to as the RPG ONE, RPG 1.5 or RPG 2.5 (Cordless)) is a state-of-the-art machine designed for
safe use. The risks involved in using the machine are described in the operating instructions below. Using this machine in a way
other than that described in these instructions can lead to serious physical injury and material damage.
Therefore:
• Observe warning messages at all times.
• In addition to this operating instructions, the general warning messages for electric and cordless tools (see supplement),
which should always be retained.
• Keep complete documentation close by the machine.
• Generally valid regulations for the prevention of accidents must be observed.
• Observe country-specific regulations, standards and guidelines.
• Always ensure that the machine is in good working order. Observe the maintenance information (chap. 10, p. 77).
• The machine may only be operated if all safety equipment such as restarting block and overload protection is in proper working
order and the viewing window is closed. The machine must have a solid footing. Check whether the substrate is able to take
sufficient loads. A radial space requirement/freedom of movement of approx. 1 m around the machine is required for people.
• Report any unusual machine behavior to the person responsible immediately.
• Only use the dimensions and materials specified in these instructions. Other materials should be used only after consulting
with Orbitalum Tools customer service.
• Use only original tools, spare parts, materials and accessories from Orbitalum Tools.
• Repair and maintenance work on the electrical equipment may only be carried out by a qualified electrician.
• At the end of each working cycle, before transportation, changing tools, cleaning and performing any maintenance, adjust-
ment or repair work, switch off the machine, wait until the machine/tool stops running and pull the mains plug and/or take
the rechargeable battery out of the machine.
• Do not carry the machine by the cable and do not use the machine to pull out the mains plug except in an emergency. Protect
the cable from heat, oil and sharp edges (chips).
• During operation, keep hands away from the tools.
• Check that the tube is correctly clamped.
• Switch on the machine only when the tube has been clamped.
• Do not use the machine in wet surroundings. Only work in canopied surroundings.
• In extreme conditions of use, conductive dust can settle inside the machine. For this reason and for better safety, an on-site
SPE-PRCD or ground-fault circuit is required between the mains network and the machine, to be installed and tested if
necessary by a professional electrician.
• When working with the machine, wear safety shoes (in accordance with EN ISO 20345, at least S1), safety goggles (according
to DIN EN 166 Class 2 basic resistance S), snug-fitting safety gloves (according to DIN EN 388 Class 2 against wear, cut
resistance Class 3, tearing resistance Class 2, piercing resistance Class 3 and as per EN 407 at least Performance level 1 against
contact heat) and hearing protection (according to DIN EN 352-4 or comparable).
• Operator age: The respectively valid country-specific laws/standards/guidelines/directives have to be followed.
46
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
RPG ONE, RPG 1.5, RPG 2.5
Cd
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN
Tabla de contenido
loading

Este manual también es adecuado para:

Rpg 1.5Rpg 2.5

Tabla de contenido