Switching The Machine On; Rpg Electric; Rpg Cordless - Orbitalum RPG ONE Traducción Del Manual De Instrucciones Original

ENGLISH
Operation
9.3

Switching the machine on

9.3.1

RPG Electric

1. Check if the viewing window is closed, and close it, if necessary.
2. Set the desired speed via the speed regulator (1).
3. Press the ON/OFF switch (2).
X The machine starts up.
1
NOTE!
NOTE!
9.3.2

RPG cordless

1. Check whether the viewing window is closed, and close it, if necessary (only with RPG 1.5 and RPG 2.5 battery).
2. Connect battery (1) to RPG Cordless.
3. Press the ON/OFF switch and/or speed regulator (2).
X The machine starts.
1
74
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
X Do not use the locking button as this inhibits the shutdown process, see chap. 9.1,
p. 71.
If the tool vibrate after starting up, the cutting speed is too high.
X Reduce the cutting speed (see chap. 9.2, p. 72).
RPG ONE, RPG 1.5, RPG 2.5
2
2
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN