Determining Tube Dimension; Fitting The Multifunctional Tool And The Tool Holder; Fitting The Multifunctional Tool; Fitting The Tool Holder - Orbitalum RPG ONE Traducción Del Manual De Instrucciones Original

RPG ONE, RPG 1.5, RPG 2.5
8.1

Determining tube dimension

1. Determine the tube dimension to be processed.
2. Select tool holder, multifunctional tool and clamping shells (accessories, see chap. 3.8, p. 54).
NOTE!
8.2

Fitting the multifunctional tool and the tool holder

8.2.1

Fitting the multifunctional tool

X Screw on the multifunctional tool (1) with Torx
screwdriver onto the tool holder (2).
8.2.2

Fitting the tool holder

1. Install tool holder (1) with multifunctional tool in the groove guide frontal from the front and place the processing type and
outer diameter of tube accordingly. RPG 2.5 (Cordless): according to the type of application (beveling/squaring) install the
tool holder in one of the 6 fastening threads as per description (see chap. 3.7, p. 53).
2. Tighten screw (2) of the tool holder with the spanner.
3. Check that the tool holder (WH) and multifunctional tool (MFW) are seated firmly, and tighten if required.
The tool holder with the multifunctional tool is now assembled.
RPG ONE and RPG 1.5 (Cordless)
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN
Please check the outer diameter of the tubes before ordering the clamping shells. The different
standards sometimes involve a special size (particularly for tubes in accordance with DIN 2430).
2
1
RPG 2.5 (Cordless)
Setup and assembly
2
1
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
2
1
63