Function Buttons - Honeywell CS071AE Manual De Instrucciones

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS

POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
COOL
Please make sure water is added prior to setting the Cool Mode. Press the
the indicator light is illuminated on the control panel. This activates evaporative cooling.
The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media
is completely wet. In COOL mode, unit may make a gargling sound when water level is below the
minimum level mark. This is normal. Follow instructions to refill water tank with adequate water.
Note: When the indicator light is switched OFF, the unit can still function in a fan only mode
(without evaporative cooling). The Sleep* function can still be switched on in a Fan only mode.
SPEED
Press the button repeatedly to change the speed between Ultra Low - Low – Medium – High -
Turbo. The indicator light will show the selected speed.
TIMER
Press the button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5
hours of use.
SWING
Press the button until the
The louvers will begin to move left to right automatically.
SLEEP*
When SLEEP* mode is selected, the fan speed will start running on Turbo Speed for one hour and
then reduce one speed level every hour until it reaches Ultra Low speed. The fan will then remain at
Ultra Low Speed until it is turned Off.
indicator light is illuminated on the control panel.
EN 3
button until
* Applicable for models with Sleep feature only
Louver
Movement