Sekey Home 3001 Manual De Usuario página 9

PREPARATION
Step 1, Remove four silver screws from the sides of the appliance, two screws on each side.
Glass
Step 2, remove the foam pieces inside the appliance.
Step 3, remove the wall bracket out of the packages.
Wall Mounting Installation
Since many different materials are used on different walls, it is highly recommended to consult your
local builder before installing the appliance on the wall.
A.Select a location that is not prone to moisture and is located at least 914mm away from
combustible materials such as curtain drapes, furniture, bedding, paper, etc.
B.Place the unit face down on a soft, non-abrasive surface.Unscrew the screws and remove the
bracket from the back of the device, please refer to Figure 1.
6