Sekey Home 3001 Manual De Usuario página 16

Flame Speed Control
Press flame speed button on the remote control to adjust the flame speed. The flashing light bulb icon
displayed as follows on the LED screen.
Keep pressing the flame speed button to select from S1 to S5 on the LED screen to adjust the speed,
the flashing icon showed as follows:
You can also keep pressing button MENU on the remote control to adjust the flame speed.
Backlight Control
At default interface, keep pressing the button MENU to select the backlight control. The flashing bulb
light icon is displayed "BACO" as follows:
Press the button OK to display b1. Press button + or - to display B1~B7 and BAU and OFF in
order to turn off the backlight.
Regular Timer
At default interface, keep pressing the button MENU to select the regular timer, it's displayed "Hour"
and flashing timer icon as follows:
Press the button OK to start the regular timer setting.
Press button + or - to select the desired time.
The time sequence will read 00-30min, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H and 9H. The default setting is
00 as shown in the following:
NOTE: The display will return to default interface after 15 seconds without any operation on control
panel or remote control.
Mode Selection(Secondary Menu)
At default interface, keep pressing the button MENU to select Mode Selection, it's displayed "Mode"
as follows:
Press the button OK to access Mode menu.
Press button + or - to select the desired mode.
13