Child Lock - Sekey Home 3001 Manual De Usuario

Child Lock

Press and hold the Power button for about 6 seconds to lock or unlock the buttons, the LOC icon
indicates that the buttons are locked.
Once it's locked, LOC will flash for 6 seconds and then disappear. Press any button LOC will flash
again.
Long press the Power button for 6 seconds to unlock the buttons.
Please note the button ON/OFF is never locked,and this function can only be operated on the device.
Heating ON/OFF
Heating Mode Quick Start
Press button +, - or press the buttons at the same time on the remote control to quick start the
heat settings (Even it's under the weekly program) as follows:
A. Press either button + or - to see the current temperature on screen.
B. Press button + or - to adjust the temperature as desired. If the set temperature is higher than
the room temperature detected by the appliance, the heating starts. The heating will not start if the set
temperature is lower than the room temperature.
NOTE: The temperature range including ON, OFF. From 7°C to 35°C. ON: Keep heating to 45°C.
OFF: No heating, 7°C to 35°C is the selectable temperature
LOW/HIGH HEATING & SETTING THE TEMPERATURE
High Heating
At default interface, press button MENU on the remote control to display H and flashing heating icon
as follows:
Press the button OK to set temperature. The default temperature is 10°C(50°F). It's displayed as
following:
Press button + or - to adjust the temperature. If the set temperature is higher than the room
temperature detected by the appliance, the heating starts. The heating will not start if the set
temperature is lower than the room temperature.
11