Brightness Control - Sekey Home 3001 Manual De Usuario

Low Heating
At default interface, press button MENU to display L and flashing heating icon as follows:
Press the button OK to set temperature. The default temperature is 10°C(50°F). It's displayed as
following:
Press button + or - to adjust the temperature. If the set temperature is higher than the room
temperature detected by the appliance, the heating starts. The heating will not start if the set
temperature is lower than the room temperature.

Brightness Control

Brightness Control is to select the desired flame brightness level.
At default interface, keep pressing button MENU in the remote control to select the Brightness Control,
until it's displayed "bri" and flashing light bulb icon as follows:
Press the button OK to start the brightness setting. Press button + or - to select the brightness
level.
5 brightness levels can be selected as follows. The default setting is level 5, which is the highest level.
Flame Color Setting
Press the flame color button in the remote control to choose the flame color. It's displayed as "FLCO"
and flashing light bulb icon as follows:
Keep pressing the flame color setting button to select from F1 to F7 and FAU (auto mode) to change
the flame color, flashing light bulb icon is displayed in the LED screen as follows:
You can also keep pressing button MENU on the remote control to select the flame color.
12