Battery Replacement; Remote Control - Sekey Home 3001 Manual De Usuario

Battery Replacement

For the first time use the protective plastic tab for the battery must be removed.

Remote control

For remote control battery replacement, use a Lithium Cell CR2025 3V battery.
WARNING: Do not cover the outlet when the appliance is working. Unplug the power
cord when you leave the appliance for a long time.
Turn off the appliance, unplug and let cool for at least 10 minutes before attempting to service.
Only a qualified professional should attempt to service or repair the appliance.
NOTICE
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF. Wait for 5 minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If
they are,
use a vacuum to clean the vent areas.
4. With the POWER switch at the OFF position, plug the power cord back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by a professional.
NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion. Dispose of batteries at your local hazardous material processing center.
To improve operation, aim the remote control at the front of the fireplace. DO NOT press the buttons
too quickly.Give the unit time to respond to each command.
17