cecotec BOLERO DRESSCODE 7200 INVERTER Manual De Instrucciones página 31

ENGLISH
Use non-foaming or less-foaming detergent suitable for machine washing.
- Check the label. Fig. 15.
- Empty the pockets of the clothes to be washed. Fig. 16.
- Knot the long strips or laces, close zips or tighten button. Fig. 17.
- Place small items in washing bags. Fig. 18.
- Turn easy-pilling and long-pile fabrics inside out. Fig. 19.
- Separate clothes with different textures. Fig. 20.
Detergent tank
Fig. 21.
- Pull out the detergent dispenser to open it.
- Pres-wash detergent
- Main wash detergent
- Softener
Programme
Synthetic
Mix
Rapid 45'
Express 15'
Wool
Delicate
Rinse & Spin
60
Programme
Spin Only
Sport
20ºC
60' Wash
E
co 40-60
Intensive
Cotton
Necessary
Optional
Note
- When using agglomerated, ropy detergent or additives, before they are poured into the
detergent tank, it is suggested to use some water for dilution to prevent the inlet of
detergent tank from being blocked and overflowing while filling water.
- Use a suitable type of detergent for the various washing temperatures to get the best
washing performance with less water and energy consumption.
Control panel
Fig. 22.
On/off (1)
Press the On/off button to turn the device on and off.
Start/pause (2)
Press the button to start or pause the washing cycle.
Option (3)
Select an additional function, the indicator light will turn on when selected.
Programmes (4)
Different types of programmes for different types of laundry.
Display (5)
The display shows the settings, estimated time remaining, options, and status messages of
the washing machine. The display will remain on through the cycle.
Fig. 23.
Selectable options
Delay start (1)
- To set the Delay start function:
- Select a programme.
- Press the Delay button and choose the time (the delaying time can be 0-24 h).
- Press Start/Pause to activate the delay operation.
To cancel the Delay start function:
- Press the Delay button until the display be shows 0h. It should be pressed before starting
the programme.
- If the programme has already started, switch off programme to reset a new one.
ENGLISH
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER STEEL
61