Safety Symbols; General Safety Precautions - Danfoss VLT DriveMotor FCP 106 Guia De Instalacion

VLT® DriveMotor FCP 106
Installation Guide
1 Instructions
1.1 Safety and Installation Awareness
Before starting installation, read and understand this installation guide while paying attention to all safety guidelines and precau-
tions. Additional resources such as the operating guide, design guide, and programming guide can be accessed by scanning the QR
code on the front cover. MyDrive
1.2 Target Group and Necessary Qualifications
Correct and reliable transport, storage, installation, operation, and maintenance are required for the trouble-free and safe operation
of the drive. Only skilled personnel are allowed to perform all related activities for these tasks. Skilled personnel are defined as
properly trained staff, who are familiar with and authorized to install, commission, and maintain equipment, systems, and circuits in
accordance with pertinent laws and regulations. Also, the skilled personnel must be familiar with the instructions and safety meas-
ures described in this manual and the other product-specific manuals. Non-skilled electricians are not allowed to perform any elec-
trical installation and troubleshooting activities.
Only Danfoss authorized, skilled personnel are allowed to repair this equipment. Further training is required to perform the activi-
ties related to repair.

1.3 Safety Symbols

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).

1.4 General Safety Precautions

LACK OF SAFETY AWARENESS
This document gives important information on how to prevent injury and damage to the equipment or the system. Ignoring this
information can lead to death, serious injury, or severe damage to the equipment.
-
Make sure to fully understand the dangers and safety measures present in the application.
HAZARDOUS VOLTAGE
AC drives contain hazardous voltage when connected to the AC mains or connected on the DC terminals. Failure to perform
installation, start-up, and maintenance by skilled personnel can result in death or serious injury.
-
Only skilled personnel must perform installation, start-up, and maintenance.
Danfoss A/S © 2022.09
ecoSmart , and pc tools – can be downloaded at www.danfoss.com.
® ™
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
W A R N I N G
Instructions
AN40855215838601-000101 / 130R1249 | 5