Switching Off Delay Mode; Flap Functioning; Weekly Timer Mode - Olimpia splendid CALDO SKY Instruccioes Para La Instalación, Uso Y Mantenimiento

9.5 - Switching off delay mode

Press button when the appliance is functioning to activate and set the switching
off delay mode; the TIMER LED on the appliance display turns on and the value
is shown.
Press the button once or more to set the desired delay (from 1 to 8 hours) after
which the unit will turn off.
Wait approximately 5 seconds without pressing any button: the delay will be set and the
TIMER LED will turn on on the display.
After confirming the activation of the timer, it is possible to change the functioning mode
at any moment by pressing button
off.
To cancel the delayed switching off, press button
by mode or, as an alternatively, repeat the setting procedure of the delay, entering the
value .
It is possible to set the desired delay until the hours numeric sym-
bol flashes. Once setting is over, after 5 seconds, the numeric val-
ue stop flashing and it is automatically memorized. Is it's desired
to further change the delay time, it's necessary to repeat the oper-
ation from the beginning.
The weekly timer and this function can be set at the same time.
When the appliance is on, pressing button
If it is desired to stop the flap in a certain position to direct the air flow, press button
again when the flap is oriented as desired.
Press the button one more time to start the flap oscillation again.
This function can only be activated through the app.
. Once the set time has passed, the unit will turn

9.6 - Flap functioning

9.7 - Weekly Timer mode

and the unit will switch to stand-
will cause the flap to start oscillating.
EN - 19
CALDO SKY