Remote Control Functions Buttons; Functioning; Fan Mode - Olimpia splendid CALDO SKY Instruccioes Para La Instalación, Uso Y Mantenimiento

8.2 - Remote control functions buttons

A remote control to ease the settings and the functions of the
appliance is supplied.
At each pressure of a button of the remote control, the appli-
ance emits a "beep" to report the signal reception.
In order to use the appliance it is necessary to press the switch on
the right side of the appliance on "I" (ON) (position 6 - figure X).
ON/OFF button
Press this button to switch the appliance on; the appliance starts in FAN mode
and the flap opens.
Press it again to switch the appliance off.
Operation mode selection button
Press this button to select the desired functioning mode
Minimum power (LOW) > Maximum power (HIGH) > FAN (FAN)
Flap button (SWING)
Press this button to adjust air direction.
Switching off delay button
Press this button to confirm/cancel the appliance switching off delay.
ECO mode button (temperature setting)
Press this button to set the desired temperature. After pressing the button, set
temperature with buttons
Setting values increase/decrease buttons
While using this mode, the appliance doesn't exert any action neither on temperature nor
on air humidity in the room.
When pressing the ON/OFF
and

9 - FUNCTIONING

9.1 - Fan mode

button, the appliance starts in this mode.
(range: 18°C÷45°C).
EN - 17
CALDO SKY