Install The Wheel Kit; Connect The Battery - Champion Global Power Equipment CPG4000DHY-EU Manual Del Operador

CPG4000DHY-EU - 3500W WIRELESS REMOTE START OPEN FRAME INVERTER
ASSEMBLY
Your generator requires some assembly. This item is shipped from
our factory without oil. Recommend 10w30 Non synthetic oil &
fuel (Petrol) needs to be added on first use before starting the
engine.
If you have any questions regarding the assembly of
your generator, call our Technical Support Team at
+44(0)1942-715-407. Please have your serial number and model
number available.
Unpacking
1. Set the shipping carton on a solid, flat surface.
2. Remove everything from the carton except the generator.
3. Carefully cut each corner of the box from top to bottom. Fold
each side flat on the ground to provide a surface area to work
with the generator.

Install the Wheel Kit

CAUTION

The wheel kit is not intended for over-the-road use.
Install the Wheels
1. Before adding fuel and oil, carefully tip the generator onto the
control panel side.
2. Remove wheel hub cap (B) from wheel by inserting a small
screwdriver into the slot provided and pry upward.
3. Slide the roll pin (C) through the wheel (A) from the outside.
4. Slide the roll pin through the mount point on the frame.
5. Insert r-clip (D) into hole at end of roll pin.
6. Re-install hub cap on wheel.
7. Repeat to attach the second wheel.
C
B
D
A
Install the Support Leg
1. Attach the support leg (E) to the generator frame with flange
bolts (F).
2. Slowly tip the generator back down so that it rests on the
Wheels and support leg.
Install the Handle
3. Place the handle (G) over the mounting channel on the frame.
4. Secure the handle to the frame using the two flange bolts (H)
(M8x45).
5. Place a flange lock nut (I) on the end of each bolt and fasten
securely. DO NOT over tighten the flange lock nuts.
H
I

Connect the Battery

1. Remove the protective cover from the red (+) lead on the
battery.
2. Attach the red (+) lead to the red (+) terminal on the battery
with the bolt and secure with the nut.
3. Repeat for the black (–) battery lead.
15
ASSEMBLY
E
EN
F
G