Notes For Installation; Electric Wiring - HTW W2 Manual De Usuario E Instalacion

Notes for installation

Remove
Before removing air conditioner to the other place, you
should contact the seller firstly.
Then it must be done under the direction of the
professional technician. In addition, the charge of this
must be paid.
Noise
● Install in a location where is firm enough to avoid the
enlargement of noise and vibration
● Don't put anything in front of the outlet of the unit
to avoid increasing noise.
● Be sure that hot air or noise will not inconvenience neighbors.
● Please contact the seller as soon as there is strange noise during operation.
● Please use the safety support.

Electric wiring

● Must connect with ground reliably.
● The exclusive circuit must be used. But removable socket
can't be used because poor contact of it can cause over heat or
fire
● Don't pull the power cord strongly.
In fixed circuit, there must be electricity leakage protection switch
and leakage current is less than 30mA.
● Connecting method between air conditioners and power cord and
interconnecting method of each individual element with one
another should accord with wiring diagram on the unit.
● The air conditioner should be installed in accordance with national wiring
regulation.
● An all-pole disconnection switch having a contact separation of at least 3
mm in all poles should be connected in fixed wiring.
● Air switch (thermal-magnetic breaker) should be installed in the circuit.
● If the supply cord is damaged,it must be replaced by the manufacturer or
● All the electrical work must be done according to the local wiring regulations.
37