Manual Operation; Setting The Minute Minder - Tecnogas FN3K66E4SX/1 Manual De Uso

OVEN USE
INSTRUCTIONS FOR DIGITAL TIMER
SETTING THE TIME OF DAY (24 H CLOCK)
After plugging in or reconnecting to a power source after current decay, "0.00", and "AUTO"
flashes.
Press button M approximately 2 sec., dot icon starts flashing. Set the current time using buttons (-)
and (+). About 7 seconds after the set time has been finished, new data is memorized.
The time correction can be done later :
Press button (-) and (+) approximately 2 sec., dot icon starts flashing. Then you can set the current
time.
Notice! If the correct time is not set then proper operation of the oven is not possible.

MANUAL OPERATION

If the programmer is not in semi-automatic or full-automatic mode you can use oven functions
manually.

SETTING THE MINUTE MINDER

You can activate the minute minder at any time, regardless the activity state of other programmer
functions. The measured time ranges from 1 minute to 23 hours 59 minutes.
Press button M until the minute minder icon starts to flash, and the display shows "0.00".
Enter the required time using buttons (+) and (-). Minute minder icon remains on the display.
After the set time has elapsed, an audible signal will be heard for some minutes and the minute
minder icon starts to flash again.
Press any buttons to turn the signal off; the minute minder icon disappears, and the display
indicates the current time.
17