IMPORTANT: The oven produces hot air or steam during the cooking processes. Take great care
when you open the door.
The electric power cable of the appliance must not be replaced by the user. It must only be
replaced by a qualified electrician.
Never line the oven with aluminium foil. It could block the slots and prevent regular heat
exchanges from taking place, consequently damaging the enamelled surface.
Before you start using the oven for cooking, you must remove the protective film from the oven
door and heat the empty oven at maximum temperature for about (this will eliminate the odours
and fumes created by manufacturing residues). After this, the oven must be thoroughly cleaned
with soapy water and rinsed well, but do not use too much water as this could penetrate and
damage the internal components.
Always call an authorized Technical Assistance Center and insist on original spare parts if repairs
are required. Repairs made by incompetent persons could cause damage.
The appliance is conform to the following European Directives and Regulations :
(CE) 1275/2008 Regulation on electricity consumption in stand-by and off modes
Directive 2005/32 / EC / Electric consumption in stand-by and off functions
Directive 2014/35/EC
Directive 2014/30/EC
Directive 2012/19/EC
Directive 2009/125/EC
Directive 2011/65/EC
Regulation 1935/2004/EC
Regulation 1907/2006/EC
IMPORTANT INFIRMATION REGARDING SAFETY
( Low Voltage Appliances )
( ElectroMagnetic Compability )
( WEEE - Waste Electrical and Electronic Equipment )
( ErP - Eco Design )
( RoHS - restriction of hazardous substances)
( Materials intended to come into contact with food )
( REACH –Restriction of Chemicals )
4