Electrical Connection; Complete Overview; Appliance Diagram - CASO DESIGN VacuChef 50 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
DE

4.6 Electrical connection

EN
In order to ensure the safe and trouble-free operation of the device, the following inst-
FR
ructions must be observed for the electrical connection:
Before plugging in the unit, compare the voltage and frequency data on the vacuum
IT
sealer's rating plate (found on the bottom of the unit) with that of your electrical net-
work. This data must be compatible. If in doubt consult a qualifi ed electrician.
ES
The use of a multi-plug outlet adapter is not recommended due to fi re danger.
Inspect the power cord for damage and ensure it doesn't run under the unit or over
NL
hot or sharp surfaces.
The electrical outlet must be protected by a 16A safety cut-out switch.
The electrical safety of the unit is only guaranteed if it is connected to a properly
installed protective conductor system. If in doubt, consult a qualifi ed electrician. The
manufacturer cannot be made responsible for damages due to a missing or damaged
protective conductor.
The unit is not intended for operation with an extension cord.

5 Complete Overview

This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.

5.1 Appliance diagram

2
1
Bag fi xing bar: Fixes the bag during
vacuuming and sealing.
2
On/Off power switch
3
Recessed grips: On both sides of the
device.
4
Sealing strip: Presses the bag against
the sealing bar.
28
CASO VacuChef 50
4
5
1
6a
6
7
8
3
5
Gasket: A spare gasket is included in
the scope of delivery.
6
Vacuuming hose connector: For
vacuuming of vacuum containers or
vacuum zip bags.
9
Tabla de contenido
loading

Este manual también es adecuado para:

1416

Tabla de contenido