Tineco CARPET ONE Manual De Uso página 24

Brush Roller Cover
Press brush roller cover release button on the
cover and pull upward to remove.
When replacing, always latch the brush cover into place to avoid leakage.
Brush Roller
Remove the brush roller by squeeze the brush
roller tab and pulling out.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Rinse with water. Use the provided cover scraper
to clean the gap in the front side to avoid
blockages.
On floor
Using the cleaning tool, remove the hair and
debris wrapped around the roller and rinse
with water. Allow it to dry completely before
reinstalling.
Replace the brush roller by inserting the brush
roller end into the right side of the holder, then
attach the roller tab to the left side to lock into
place.
22
On carpet