Storage - Italjet DRAGSTER 125 Manual De Uso Y Mantenimiento

4. Treat rubber, vinyl, and unpainted
plastic components with a suitable
care product.
5. Spread a non-abrasive wax on all
painted surfaces.
6. After cleaning, start the engine
and let it run at idle for a few min-
utes to dry the residual moisture.
7. Allow the vehicle to dry completely
before storing or covering it.
WARNING
Foreign matter left on the
brakes or tires can cause you
to lose control of the vehicle. - Make sure there is no lubri-
cant or wax on the brakes or
tires.
- If necessary, wash the tires
with warm water and a neu-
tral detergent.
- If necessary, clean the brake
discs and pads with a special
spray cleaner.
- After washing the motorcy-
cle, test the efficiency of the
brakes.
EN - 63
6.1.c Storage
Always store the vehicle in a cool,
dry place. If necessary, protect it from
dust by covering it with a permeable
sheet.
Make sure that the engine and the ex-
haust system have cooled down be-
fore covering the motorcycle.
ATTENTION
To prevent corrosion, avoid
damp basements,
shelters (due to the presence
of ammonia) and environ-
ments where strong chemi- cals are stored.
animal