Engine Oil And Filter Replacement - Italjet DRAGSTER 125 Manual De Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

5.1.b
Check oil level
NOTE: The check must be carried out with
the engine just switched off and still warm.
WARNING
The
motorcycle
reaches high temperatures,
be careful not to get burned.
- Place the motorcycle on a level sur-
face, in a vertical position raised on
the central stand.
- Wait a few minutes to allow the oil to
settle.
- Unscrew the dipstick (1) and re-
move it, clean the dipstick with a rag
and insert it back into the filling hole
(2) without
screwing it in, then re-
move it and check that the oil level is
between the minimum level marks "
MIN "and maximum "MAX ".
- In case of topping up, insert oil
through the hole (2) up to the MAX
level and not beyond.
- Reassemble the dipstick (1) by
screwing it.
muffler
3
1
2
EN - 43
5.1.c
Engine oil and filter replace-
MAX
ment
NOTE: Oil replacement must be carried
MIN
out with the engine just turned off and still
LEVEL
warm.
Be careful not to burn your-
self with hot oil.
- Place the motorcycle on a level sur-
face, in a vertical position raised on
the central stand.
- Remove the oil dipstick (1).
1
WARNING
Tabla de contenido
loading

Este manual también es adecuado para:

Dragster 200

Tabla de contenido