Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PLLA 12 B2 Traducción Del Manual De Instrucciones Original

Before use

Removing/charging/inserting the battery pack

CAUTION!
► Always unplug the appliance before you remove the battery pack 5
from or connect the battery pack to the high-speed battery charger 9 .
NOTE
► The battery pack is supplied partially charged . Before first use, charge
the battery pack 5 in the high-speed battery charger for at least
1 hour . This ensures maximum performance of the battery pack 5 .
You can charge the lithium-ion battery at any time without shortening
its service life . Interrupting the charging process does not damage the
battery pack 5 .
► If the battery pack 5 overheats during operation, it cannot be
charged . Allow it to cool down first .
■ Never charge the battery pack 5 if the ambient temperature is below
10°C or above 40°C .
1 . To remove the battery pack 5, press the release buttons 4 and pull the
battery pack 5 out of the appliance .
2 . Insert the battery pack 5 into the high-speed battery charger 9 .
3 . Insert the mains plug into the socket . The control LED 0 lights up red .
4 . The green charge level indicator LED q indicates that the charging
process is complete
5 . Insert the battery pack 5 into the appliance .
PLLA 12 B2
and the battery pack 5 is ready for use .
GB │ MT │ 77 ■