Commissioning Of The Equipment - Optimus IF-7W60DCETH Manual De Instrucciones

5. COMMISSIONING OF THE EQUIPMENT

The commissioning of the device requires
sending configurations to the device via the
Ethernet connection. This requires a PC
equipped with a network card and connected to
the IF-7WDCETH, either via a switch or directly
via a network cable. The PC must have Call Point
5.2 or higher or Call Point Configurator software
installed.
1. Make the connections
equipment.
2. Switch on the power supply to the
equipment.
3. Using the Call Point software, configure the
parameters of the IF-7WDCETH and its
internal amplifier module.
*CAN bus communication speed setting: The
default CAN communication speed of the IF-
7WDCETH is 33,333 kbit/s,
communication with NS-CAN, NSD-CAN sensors
and MD-30C or ME-200C microphone desks
4. Next, configure the parameters of the
IF-7WDCETH internal amplifier module.
Activate the check box to
enable the power module.
Supervision
of the
internal 24V
of the power
stage.
Zone
name.
Zone
number.
IF-7WDCETH version 5.2.001 ENG
IF-7WDCETH
4ETH
Alarm language, buzzer activation and CAN bus speed*.
between the
which allows
.
Configures the loud-
speaker line monitor-
Amplifier power. Choose the power according to the
ing options.
IF-7WETH model you have installed:
Activate to display the local music input as
an additional music channel in the music
channel management grid.
Class D wall-mounted amplifier
Configuration of input and output contacts.
Emergency mode configuration.
SIP call configuration.
Team name
IP address configuration. Default
IP: 10.1.1.1.1. If you wish to
assign a different network
address to the device than the
default one, follow section 5.1.
Configuration of the network
addresses of the IF-7WDCETH.
Sensitivity of local audio
inputs for announcements
and music (-20d or 0dB).
with IP connection
IF-7W60ETH: 60W
IF-7W120ETH: 120W
IF-7W150 ETH: 150W
IF-7W250 ETH: 250W
IF-7W300 ETH: 300W
IF-7W460ETH: 460W
Fan on and off temperatures.
Activate the checkbox if you
have the optional IF-MER
module.
Paging source. The source you
choose will have a priority
assigned to it with respect to
all other sound sources in the
system. This will be the priori-
ty of the local paging input.
Music source. The source you
choose will have a priority
assigned to it with respect to
all other sound sources in the
system. This will be the priori-
ty of the local music input.
16