Technical Characteristics; If-7Wdceth; Specifications Internal Amplifier Module - Optimus IF-7W60DCETH Manual De Instrucciones

7. TECHNICAL CHARACTERISTICS

7.1. IF-7WDCETH

Ethernet communication
CAN bus
VoIP
Input contacts
Output contacts
Audio outputs
Maximum output level
Frequency response (-3dB)
Total harmonic distortion (preamp)
Signal-to-noise ratio
Internal SD memory
Controls
Power supply
Consumption (idle)
Indicators
Weight
Finishes
Dimensions (mm)

7.2. SPECIFICATIONS INTERNAL AMPLIFIER MODULE

Model
Amplifier type
Energy efficiency
Power output
Leds
Fan
THD+N (@1kHz)
Consumption
Standby
Idle
Max
IF-7WDCETH version 5.2.001 ENG
IF-7WDCETH
4ETH
2 Ethernet connections (RJ45) A and B for redundant installations. IP Layer 3 & Layer 4
Network.
Speed: 33,333kbit/s
SIP protocol RFC3261.
G711 (PCMA and PCMU), G722 and L16 coding.
3 input contacts. Configurable NC/NO.
3 output contacts. Configurable NC/NO.
1 FAIL Relay. Max. DC load current: 150 mA. Max. load voltage DC or AC peak: 350V.
1 audio output for loudspeaker line (100V).
100V
100 Hz - 18 kHz
< 0.1 % (1 kHz)
Better than 85 dB
16 GB, for storage of pre-recorded messages. Supports audio files in WAV / MP3 / OGG
format.
IP channels: Volume, bass and treble or 10-band graphic equaliser (30Hz / 60Hz /
125Hz / 250Hz / 500Hz / 1KHz / 2KHz / 4KHz / 8KHz / 16KHz) via software.
Full range 100-240 V.c.a. and 24VDC
15W
Indicator lights GENERAL FAULT, SYSTEM FAULT, EMERGENCY and GRAL. POWER
(mainboard power).
2.9 kg
Black painted iron RAL9005.
142.5 (width) x 105 (height) x 332.4 (depth)
IF-7W60DCETH IF-7W120DCETH
60W 120W
POWER, STANDBY, PROTECT, CLIP and SIGNAL
No No
<0.5 <0.5%
3.5W
3.5W
6W 6.5W
70W 134W
IF-7W150DCETH IF-7W250DCETH
CLASS D
90%
150W 250W
No No
<0.5% <0.5%
4W
4W
7.2W 7W
165W 276W
Class D wall-mounted amplifier
with IP connection
IF-7W300DCETH IF-7W460DCETH
300W
Yes
<0.5%
4W
7.2W
339W
460W
Yes
<0.5%
4W
7.2W
520W
20