Operation - Klarstein FULL HOUSE DOWN AIR Manual De Instrucciones

OPERATION

Start cooking
1
Touch the On/Off button
on the hob control panel.
After switching on, a
single beep sounds and
[-] is displayed. The unit is
now in standby mode.
Select the desired heating setting.
• If no heating level is selected within one minute, the appliance will switch off
automatically. In this case, start again at step 1.
• You can change the heat setting at any time during the cooking process.
• Press one of the corresponding buttons to increase or decrease the heat setting.
2
Place suitable cookware
on the hob you are using.
Make sure that the hob
and the outside of the
cookware are clean and
dry.
4
3
When you touch the
heating field selection, an
indicator light flashes next
to the button.
Select the desired cooking
zone
EN
63