Klarstein FULL HOUSE DOWN AIR Manual De Instrucciones página 74

EN
74
Problem Possible cause
The appliance This is caused by induction
makes a low cooking technology.
humming noise
when used with
a high heat
setting.
The unit emits The fan built into the unit has
fan sounds. switched on to prevent the
electronics from overheating.
It may happen that the fan
continues to run for some time
after you have switched off
the unit.
The pots do not 1. The appliance cannot detect
heat up. the pot because it is not
suitable for induction.
2. The appliance cannot detect
the pot because the pot is
either too small for the hob
or is not in the centre of the
hob.
The appliance Technical error.
or hob has
unexpectedly
switched itself
off, a sound
is heard and
an error code
is displayed
(usually
alternating with
one or two
digits of the
timer display).
Potential solution
This is normal. However, the
noise should become quieter
or disappear completely when
you reduce the heat setting.
This is normal and does not
require any action. Do not
switch off the power of the
mains socket when the fan of
the appliance is still running.
Only use cookware suitable for
induction (see "Selecting the
cookware").
Place the pot in the centre of
the hob and make sure that the
dimensions of the bottom are
suitable for the hob.
Please make a note of the error
code, switch off the power to
the wall socket and contact
customer service.