battioni Pagani GARDA 3500 Manual De Instrucciones De Uso Y Mantenimiento página 34

instructions manual
for use and maintenance of the combined groups for the GARDA / LEDRA series
The combined groups of the GARDA and LEDRA series were designed and constructed in compliance with the EEC safety
regulations and were assessed for risks according to the standard UNI EN ISO 12100:2010; in particular they are in conformity
with machinery directive 2006/42/CE and subsequent modifications and additions.
This manual contains the declaration of incorporation of partly completed machinery and all the instructions required by
the users and by the manufacturers of systems to use our products safely; therefore, the manual must always be kept near
the group.
Carefully read the instructions in this manual before attempting any operation with and on the group.
This danger symbol in the manual means that important instructions relating to safety are being provided.
The operators are the first recipients of this information and are responsible for compliance, not only in relation
to themselves, but also in relation to other persons exposed to the risks associated with use.
The descriptions and illustrations in this manual are purely indicative.
The manufacturer reserves the right to make any type of change to this manual at any time.
Upon receipt of the product, check that the combined groups are complete with all their parts.
Any anomalies or missing parts must be notified within 8 days of receipt of the product.
The Supplier guarantees that the product sold is free from defects and undertakes to repair or, by final decision, to replace
the faulty parts only if the defects are clearly attributed to the manufacturing process or to the materials used. In any case the
costs of labour, travel and transport, and any customs expenses, shall be paid by the Purchaser. The vendor is not obliged to
pay damages except in the case of fraud or serious offence. All parts subject to normal wear are excluded from the warranty.
The warranty will cease to be valid if:
• the faults reported are the result of accidents or obvious carelessness or negligence by the Purchaser,
• the parts have been modified, repaired or fitted by persons not authorised by the vendor,
• the failures and breakages have been caused by use that is unsuitable or heavier than that provided for by the vendor,
• the Purchaser has failed to make the payments as agreed under the contract.
The Purchaser loses the right to warranty if the defects are not notified within eight days from the discovery, notwithstanding
art. 1512 of the Italian Civil Code. The Vendor reserves the right to make changes or improvements to its products without
any obligation to make such changes or improvements to the units already previously produced and/or delivered. The
Vendor reserves the right to make changes or improvements to his/her products without being obliged to make the same
changes or improvements to the units already produced and/or delivered previously.
Thank you for choosing Battioni Pagani®.
p. 18
INTRODUCTION
WARRANTY
Setting the pace since 1953
Battioni Pagani
®