Important Safety Instructions - Bosch MIC-ALM-WAS-24 Manual De Instalación

MIC Alarm-Washer Interface Unit
1.4

Important Safety Instructions

Read, follow, and retain for future reference all of the following safety instructions. Follow all
warnings before operating the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Notice!
To meet the Mains Supply Voltage Dips and Short Interruptions requirements per EN 50130-4
Alarm Standard, ancillary equipment (for example, UPS) is necessary. The UPS must have a
Transfer time between 2-6 ms and Backup Runtime of greater than 5 seconds for the power
level as specified on the product data sheet.
Bosch Security Systems
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
Do not install unit near any heat sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
Never spill liquid of any kind on the unit.
Take precautions to protect the unit from power and lightning surges.
Adjust only those controls specified in the operating instructions.
Operate the unit only from the type of power source indicated on the label.
Unless qualified, do not attempt to service a damaged unit yourself. Refer all servicing to
qualified service personnel.
Install in accordance with the manufacturer's instructions in accordance with applicable
local codes.
Use only attachments/accessories specified by the manufacturer.
Installation Manual
Safety | en
5
2014.09 | 1.3 | F.01U.305.934