Technoline WT-465 Manual De Instrucciones página 11

STORE FM RADIO STATIONS
You can store up to 20 FM radio stations in preset channel automatically or
manually.
STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN)
1. Press / AUTO to turn on FM radio.
2. Press / AUTO and hold for 2 seconds.
 The received stations are automatically stored to preset numbers.
STORE FM RADIO STATIONS MANUALLY.
1. Tune to an FM radio station.
2. Press MEMORY to activate the storing mode. The display is blinking.
3. Press TUNING ︿ or ﹀ to select the preset number.
 [P 01 ~ P 20] is preset station numbers.
4. Press MEMORY to select a number for the selected station.
LISTEN TO A PRESET FM RADIO STATION
In FM mode, press MEMORY to select a preset number.
Note
The digit display return to clock display if no buttons is pressed for 10 seconds
SET ALARM TIMER
Make sure that you have set the clock correctly.
You can set two separate alarm timers. For the alarm sound, you can select
the FM radio or the buzzer.
1. Press / AUTO to Clock mode.
2. Press and hold AL1 or AL2 for two seconds and alarm digits [0:00] are
blinking.
3. Press Tuning ︿ to set the alarm hour and Tuning ﹀ to set the alarm
minute.
4. Press TIME SET again to confirm setting or the setting will be confirmed
automatically if no button is used within 3 seconds.
5. Press AL1 or AL2 again to select a sound source. FM radio or alarm sound.
The options can be selected in following order:
Alarm off (OFF) > alarm sound (bb) > radio alarm
Note
The selected radio volume is the alarm volume.