Restoring The Original Configuration; Technical Specifications - SOMFY ilmo2 50 S WT Guia De Instalacion

ilmo 50 S WT

8.2 Restoring the original configuration

8.2.1 Using the control point connected to the
roller shutter
Caution: Follow each of the 4 steps in the proce-
dure carefully to correctly restore the original
configuration.
Place the roller shutter in the mid-height
1)
position.
Caution: Repeat the next step 3 times in
2)
succession
Press the Up button until the roller shutter
-
moves. Release the button immediately.
Caution: Repeat the next step twice in
3)
succession
Press the Down button until the roller shutter
-
moves. Release the button immediately.
Press the Down button again until the roller
4)
shutter makes 2 successive movements in the
same direction.
The motor has been restored with the
►
original configuration. Repeat the commis-
sioning process.
8.2.2 Using the wired electronic motor setting tool
Press the Up and Down buttons on the setting
-
tool at the same time until the roller shutter
makes an initial up and down movement
followed by a second one.
The motor has been restored with the
►
original configuration. Repeat the commis-
sioning process.

9. Technical specifications

Power supply
Operating temperature
Index protection rating
46
Copyright © 2008 - 2017 Somfy Activités Société Anonyme. All rights reserved.
1
3
x 2
7 s
230V/50 Hz ~
- 20°C to + 60°C
IP 44
Installation guide
2
x 3
4