Attaching The Anti-Tip-Brackets - Thermador T18 Serie Instrucciones De Instalación

1.

Attaching the anti-tip-brackets

,
,

2 anti-tip-brackets are required for each appliance

The supplied set contains fastening screws for
various applications. Select the fastening screws
according to the local conditions.
The anti-tip-brackets (a) must overlap a minimum of
2 1 / 8 " (54 mm) over the appliance to secure the
appliance.
If this minimum length cannot be observed for structural
conditions it is possible to do this by fastening
a spacer (b) behind the anti-tip angle, e.g. a sufficiently
dimensioned wood board.
The length of the plank should correspond to the wi
of the installation enclosure!
1. Specify the attachment poin ts of the anti-tip-brackets
according to the sect ion on "Installation
dimensions".
2. Attach the anti-tip-brackets completely.
Be sure screws hold tight.
All manuals and user guides at all-guides.com
.
Important notes for fastening with dowels and screws:
Not recommended for use in light-weight masonry
dth
material such as cinder block.
Not recommended for use in new concrete which has n
had time to cure.
ot
13