Super Cooling; Clean Lock; Eco Mode; Self-Test - Thermador T23IR900SP Manual De Uso Y Cuidado

Super cooling

Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
Before placing large quantities of food into the
■
compartment
For cooling drinks quickly
■
Note: When super cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switching on super cooling:
To open the menu for setting the temperature,
1.
press the : button.
Press the / button.
2.
When super cooling is switched on, the symbol /
appears on the display.
Confirm the selection by pressing the 8 button. If
3.
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
Switching off super cooling:
To open the menu for setting the temperature,
1.
press the : button.
Press the > button.
2.
When super cooling is switched off, the symbol /
disappears from the display.
Confirm the selection by pressing the 8 button. If
3.
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.

Clean lock

You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 17
Press " button to open the Settings menu.
1.
Press < button.
2.
The cleaning display appears, and the countdown
starts.
All manuals and user guides at all-guides.com
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1.
2.
3.
4.
5.

Eco mode

Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
■
■
Switching Eco mode on or off
1.
2.
3.
The temperature is changed, and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with the +/- buttons.

Self-test

This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 20

Setting the brightness of the control panel

1.
2.
3.
4.
5.
6.
7.
Operating the appliance en-us
Press " button to open the Settings menu.
Press < button to move to the menu item
Appliance settings.
Press 8 button.
Press > button to move to the menu item
Automatic clean lock.
To change the setting, press : button.
Refrigerator compartment: +43° F (6° C)
Cool-fresh container: +32° F (0° C)
Press the " button to open the Settings menu.
Use > button to move to the menu item Eco
mode.
Press </= button.
Press " button to open the Settings menu.
Press < button to move to the menu item
Appliance settings.
Press 8 button.
Press : button to open the menu item
Brightness.
Use < > buttons to set the required brightness.
Press 8 button.
The setting is saved.
Press ; button to exit the menu.
13